|
研究發表代表著作
|
1. Wang, J. W.* and Hon, M. H., “Sugar-mediated chitosan/poly (ethylene glycol)-β-dicalcium pyrophosphate composite: Mechanical and microstructural properties” J. Biomed. Mater. Res. Part A, 64, 2, 1, p 262-272, 2003. (SCI)
2. Wang, J. W.* and Hon M. H., “Effects of sugar cross-linking agents and thermal treatment on the culture of fibroblasts in vitro on a (PEG/chitosan) membrane” J. Biomat. Sci-Polym. E., 14, 2, p 119-138, 2003. (SCI)
3. Wang, J. W.* and Hon, M. H., Preparation and characterization of pH sensitive sugar mediated (polyethylene glycol/chitosan) membrane” J. Mater. Sci.-Mat. Med.,14, 12, p 1079-1088, 2003. NSC-89-2261-E-006-072. (SCI)
4. Wang, J. W.* and Hon, M. H., “Biodegradation behavior and cytotoxicity of the composite membrane composed of β-dicalcium pyrophosphate and glucose mediated (polyethylene glycol/chitosan)” J. Mater. Sci.-Mat. Med., 15, 2, p 129-136, 2004. NSC-89-2261-E-006-072. (SCI)
5. Wang, J. W.* and Hon, M. H., “Synthesis and Dynamic Mechanical Behavior of Glucose Mediated (Polyethylene glycol/Chitosan) Membrane” J. Appl. Polym. Sci. 93, p 809-820, 2004. NSC-89-2261-E-006-072. (SCI)
6. Chang, T. C.; Wang, J. W.* and Hon, M. H., Synthesis of nanosized chitosan-poly(acrylic acid) particles by a dropping method” Macromol. Biosci. 4, p 416-420, 2004. NSC-92-3112-B-006-005. (SCI)
7. Wang, J. W.*; Shih W. J. and Hon M. H., “Preparation and characterization of Chitosan/poly(acrylic acid) nanoparticles” JOM, 56, 11, p 237, 2004. (SCI)
8. Shih, W. J.*; Wang, J. W.; Wang, M. C. and Hon, M. H., “Phase transformation of the nano-sized hydroxyapatite synthesized by hydrolysis using in-situ high temperature X-ray diffraction” JOM, 56, 11, 59-60, 2004. (SCI)
9. Wang, J. W.* and Hon M. H. “Preparation of poly(ethylene glycol)/chitosan membranes by a glucose-mediating process and in vitro drug release” J. Appl. Polym. Sci. 96, (4), p 1083-1094, 2005. NSC-92-3112-B-006-005. (SCI)
10. Chen, C. Y., Wang, J. W.* and Hon, M. H., “Polyion Complex Nanofibrous Structure Formed by Self-Assembly of Chitosan and Poly(acrylic acid)” Macromol. Mater. Eng. 291, p 123–127, 2006. NSC-92-3112-B-006-005. (SCI)
11. Shih, W. J.*; Wang, J. W.; Wang, M. C. and Hon, M. H. “A study on the phase transformation of the nanosized hydroxyapatite synthesized by hydrolysis using in situ high temperature X-ray diffraction” Mater. Sci. Eng. C-Biomimetic Supramol. Syst. 26, 8, p 1434-1438, 2006. (SCI)
12. Chang, T. C.*; Wang, J. W.; Wang, M. C. and Hon, M. H., Solderability of Sn-9Zn-0.5Ag-1In lead-free solder on Cu substrate, Part 1: thermal properties, microstructure, corrosion and oxidation resistance” J. Alloy. Compd. 422, 1-2, p 239-243, 2006. (SCI)
13. Shih F. Y*.; Fung K. Z.; Wang, J. W., “Fabrication of LiMn2O4 thin film cathode from chitosan-containing solution” J. Alloy. Compd. 407, p 282–288, 2006. (SCI)
14. Wang J. W.* and Kuo, Y. M. “Preparation of Fructose-Mediated (Polyethylene glycol/Chitosan) Membrane and Adsorption of Heavy Metal Ions” J. Appl. Polym. Sci. 105, p 1480-1489, 2007. (SCI)
15. Kuo, Y. M.*; Wang J. W. and Tsai C. H. “Encapsulation behaviors of metals in slags containing various amorphous volume fractions” J. Air & Waste Manage. Assoc. 57, p 820–827, 2007. (SCI)
16. 張卿因、林彥甫、郭益銘*、王建文、黃菀婷、楊朝欽 “不同結晶結構熔渣對酸之抗侵蝕性質” 華醫學報，Vol. 26, pp. 15-23, 2007.
17. Wang J. W.* and Kuo, Y. M. “Preparation and adsorption properties of chitosan-poly(acrylic acid) nanoparticles for removal of Ni(II) ions” J. Appl. Polym. Sci. 107, p 2333–2342, 2008. (SCI)
18. Kuo Y. M.*; Wang J. W.; Wang C. T. and Tsai C. H. “Effect of water quenching and SiO2 addition during vitrification of fly ash. Part 1: On the crystalline characteristics of slags” J. Hazard. Mater. 152, p 994-1001, 2008. (SCI)
19. Kuo*Y.M.,Wang J.W., Chao H.R., Wang C.T., Chang-Chien G.P. “Effect of cooling rate and basicity during vitrification of fly ash. Part 2: On the chemical stability and acid resistance of slags.” Journal of Hazardous Materials, Vol. 152(2), p. 554-562, 2008. (SCI)
20. Yang K.Y.*; Wang J.W. and Fung KZ “Roles of lithium ions and La/Li-site vacancies in sinterability and total ionic conduction properties of polycrystalline Li3xLa2/3−xTiO3 solid electrolytes” J. Alloy. Compd. 458, p 415-424, 2008. (SCI)
21. Wang J.W.*; Chen C.Y. and Kuo Y.M., “Chitosan-poly (acrylic acid) nanofiber networks prepared by the doping induction of succinic acid and its ammonia-response studies” Polym. Adv. Technol. 19, p 1343-1352, 2008. (SCI)
22. 王建文*, “以幾丁聚醣/聚丙烯酸奈米纖維結構製備高感度氨氣偵測器之研究” 工程科技通訊, 99期, p24, 2008.
23. Kuo Y.M.*, Huang K.L., Wang C.T., Wang J.W., “Effect of Al2O3 mole fraction and cooling method during vitrification of an artificial hazardous material. Part 1: the resulting crystalline phase and variation of structure” J. Hazard. Mater. 169, p. 626-634, 2009. (SCI)
24. Kuo Y.M. *, Wang C.T., Wang J.W., Huang K.L., “Effect of Al2O3 mole fraction and cooling method during vitrification of an artificial hazardous material. Part 2: the encapsulation of metals and the resistance to acid” J. Hazard. Mater. 169, p. 635-642, 2009. (SCI)
25. 郭益銘*;楊朝欽;王建文;蔡政賢;羅逸文＂氧化鋁與冷卻方式於熱熔融過程扮演角色之研究”工程科技與教育學刊,6, 1, p. 92-104, 2009.
26. Wang, J.W.*, Chen, C.Y., Kuo Y.M., “Effect of Experimental Parameters on the Formation of Chitosan-Poly(acrylic acid) Nanofibrous Scaffolds and Evaluation of their Potential Application as DNA Carrier J. Appl. Polym. Sci 115(3), p. 1769 – 1780. 2010. (SCI)
27. Kuo Y.M.*, Tseng H.J., Chang J.E., Chao C.C., Wang C.T., Chang-Chien G.P., Wang J.W., “Stabilization of residues obtained from the treatment of 1 laboratory waste.2 Part 2:Transformation of plasma vitrified slag into composites” J. Air & Waste Manage. Assoc.61(1) p78-84, 2011. (SCI)
28. Wang J.W.*; Chen C.Y. and Kuo Y.M. “Preparation and characterization of chitosan coated hydroxyapatite nanoparticle as a promising non-viral vector for gene delivery” J. Appl. Polym. Sci. 121, 6, p3531-3540, 2011. (SCI)
29. Yan S.A., Chang Y.S., Wang J.W., Hwang W.S., Chang, Y.H. “Synthesis and luminescence properties of color-tunable Ba1-ySryLa4-xTbx(WO4)7 (x = 0.02–1.2, y = 0–0.4) phosphors” Materials Research Bulletin 46 p.1231–1236, 2011. (SCI)
30. Yan S.A., Wang J.W., Chang Y.S., Hwang W.S., Chang Y.H. “Synthesis and luminescence properties of Ln3+ (Ln3+ = Er3+, Sm3+)-doped barium lanthanum tungstate BaLa2WO7 phosphors” Optical Materials 34 p.147–151, 2011. (SCI)
31. I-Cheng Choua, Yi-Ming Kuo, Chitsan Lin, Jian Wen Wang, Chih Ta Wang, Guo-Ping Chang-Chien “Electroplating sludge metal recovering with vitrification using mineral powder additive” Resources, Conservation and Recycling Volume 58, January 2012, Pages 45-49 (SCI)
32. Yan S.A., Wang J.W., Chang Y.S., Hwang W.S., Chang Y.H. “Synthesis and photoluminescence properties of Ba1−ySryLa4−xDyx(WO4)7 (x=0.04–0.2, y=0–0.4) phosphors” Ceramics International, 38, 3, 2012, p 2569-2574.
33 Jian-wen Wang, Yi-Ming Kuo (2013, Jan). Synthesis of Nanosized Zinc-Doped Cobalt Oxyhydroxide Parties by a Dropping Method and Their Carbon Monoxide Gas Sensing Properties. Journal of Nanomaterials, Volume 2013, Article ID 136145, 9 pages. (SCI, 104/232, MATERIALS SCIENCE, MULTIDISCIPLINARY ). NSC 101-2221-E-273-003-MY2. 本人為第一作者、通訊作者.
34 Jian-Wen Wang* and Yi-Ming Kuo “Hierarchically porous cobalt oxyhydroxide derived from Morpho-butterfly wings: Preparation, characterization, and carbon monoxide detection at low temperatures Phys. Status Solidi A 210, No. 3, 494–502 (2013).
35. Chia-Liang Kuo, Guo-Ju Chen, Chi-Shiung Hsi, Jian-Wen Wang, Yee-Shin Chang,You-Yun Li, Weng-Sing Hwang (2014, Apr). Raman spectra and dielectric properties of the nanocrystalline Li0.43Nb0.57O3þδ. Ceramics International, 40(3), 4639–4642. (SCI, 4/26, MATERIALS SCIENCE, CERAMICS).).
36. Li-Chun Cheng,Tzung-Shian Wu, Jian-Wen Wang, Szu-Han Wu, Mei-Hui
Chung, Yi-Ming Kuo,Cheng-Hsien Tsai (2014, Jun). Production and Isolation of Chitosan from Aspergillus terreus and Application in Tin(II) Adsorption. Journal of applied polymer science, 131(12), 40436-40444. (SCI, 35/82/POLYMER SCIENCE). MOST 101-2221-E-273-003-MY2. 本人為通訊作者.
37. Jhong-Lin Wu, Ta-Chang Lin, Ya-Fen Wang, Jian-Wen Wang, Chih-Ta Wang, Yi-Ming Kuo* (2014, Jun). Polychlorinated Dibenzo-p-dioxin and Dibenzofuran (PCDD/F) Emission Behavior during Incineration of Laboratory Waste. Part 1: Emission Profiles Obtained Using Chemical Assay and Bioassay . Aerosol and Air Quality Research, 14: 1199–1205 . (SCI, 93/223/ENVIRONMENTAL SCIENCES).
38. Yi-Ming Kuo, Chitsan Lin, Jian-Wen Wang, Kuo-Lin Huang, Cheng-Hsien Tsai & Chih-Ta Wang (2015, Nov). Characterization of the products attained from a thermal treatment of a mix of zinc-carbon and alkaline batteries. Environmental Technology . (Accepted). (SCI, 119/223,ENVIRONMENTAL SCIENCES ).
39. Jian-Wen Wang; Min-Hsiung Hon; Yi-Ming Kuo; Mei-Hui Chung (2015, Nov).
Preparation and Bioactivity Properties of a Novel Composite Membrane of
Fructose Mediated -Tricalcium Pyrophosphate/(Polyethylene Glycol/Chitosan) for Guided Tissue Regeneration . International Journal of Polymer Science, Volume 2015, Article ID 494950, 10 pages. (SCI, 51/82/POLYMER SCIENCE ). 本人為第一作者、通訊作者.
40. Jian Wen Wang, Yi Ming Kuo (2015, Dec). Effects of divalent cations on the microstructure, electrical and gas sensor properties of biomorphic nano-cobalt oxyhydroxide. Fresenius Environmental Bulletin. (Accepted). (SCI, 219/223, ENVIRONMENTAL SCIENCES). 本人為第一作者、通訊作者.
41. Chia Liang Kuo; Jian Wen Wang; Yi Ming Kuo (2016, Aug). Effects of divalent cations on the microstructure, electrical and gas sensor properties of biomorphic nano-cobalt oxyhydroxide. Fresenius Environmental Bulletin, Vol. 25, No. 8, pp. 2977-2984. (SCI, 218/225, ENVIRONMENTAL SCIENCES). 本人為通訊作者
42. Jian-Wen Wang, Jhong-Lin Wu, Cheng-Hsien Tsai, Chih-Ta Wang, Yi-Chyun Hsu,Yi-Ming Kuo* (2016, Sep). Evaluation of Thermal Treatments for Elutriated Mixed Incinerator Ashes. Part 1: Co-Incineration with Laboratory Waste. Aerosol and Air Quality Research, 16: 2278–2286. (SCI, 78/225, ENVIRONMENTAL SCIENCE). 本人為第一作者
43. Jian-Wen Wang*, Yi-Min Kuo, Swun-Kwang Wang, Mei-Hui Chung (2018, Jan). Preparation and Recognition Ability of Dual templates Molecularly Imprinted Polymer for Fluoroquinol. Fresenius Environmental Bulletin, volume 27, no 1, pp 479-487. (SCI, 218/225, ENVIRONMENTAL SCIENCES). 本人為第一作 者、通訊作者.
44. Yun-Ying Hung, Li-Te Yin, Jian-Wen Wang, Chih-Ta Wang, Cheng-Hsien Tsai, Yi-Ming Kuo (2018, Mar). Recycling of spent nickel-cadmium battery using a thermal separation process. Environmental Progress & Sustainable Energy, Volume37, Issue2 P. 645-654. (SCI, 65/135, Engineering Chemical).
45. Mei-Hui Chung, Chih-Ta Wang,*, Jian-Wen Wang, Wei-Lung Chou,*, Yi-Ming Kuo (2018, Mar). Application of response surface methodology on COD removal from textile wastewater by anodic chlorination and cathodic electro-Fenton process. Desalination and Water Treatment, 108, 144-151. (SCI, 61/90, Water Resorces).
46. Yi-Ming Kuo , Jhong-Lin Wu, Jian-Wen Wang, Li-Te Yin (2018, Oct). Pollution Characteristics of Thermal Treatments for Elutriated Ashes. Part 2: Comparison with Incineration System and Plasma Melting System. Aerosol and Air Quality Research, 18:10 Yi Ming Kuo, Kuo Lin Huang, Jian Wen Wang, Cheng Hsien Tsai, Sheng Lun Lin (2020, May). An alternative approach to reclaim spent nickel–metal hydride batteries. Environmental Progress & Sustainable Energy. (Accepted), 2695-2703. (SCI, 92/242/ENVIRONMENTAL SCIENCES).
47.
|
|
研討會論文
|
1. 王建文, 洪敏雄, “還原糖交聯聚乙二醇/幾丁聚醣混摻膜特性之研究＂材料年會, 11月, 2002, 台北
2. 王建文, 洪敏雄, 以糖交聯聚乙二醇/幾丁聚醣混合支架材微結構及機械性質之研究＂醫學工程學會, 12月, 2002, 高雄
3. 王建文, 洪敏雄, “以葡萄糖交聯聚乙二醇/幾丁聚醣混摻膜動態機械性質及藥物釋放行為之研究＂第八屆生物醫學材料暨科技研討會, 9月, 2003, 中壢
4. Wang, J. W. and Hon, M. H. Template mediated nanofibrous structure: A NovelChitosan/Polyethylene glycol Scaffold for Tissue Engineering ＂ First International Meeting on Applied Physics (APHYS-2003) Badajoz (Spain), October 14-18th, 2003
5. 王建文, 洪敏雄, “以葡萄糖溶液反應法製備聚乙二醇/幾丁聚醣混摻膜及藥物釋放行為之研究＂第二十七屆高分子研討會, 3月, 2004, 台北
6. 張道智, 王建文, 洪敏雄, 以幾丁聚醣與聚丙烯酸合成奈米級高分子基因載體之研究＂第二十七屆高分子研討會, 3月, 2004, 台北
7. 陳靜怡, 王建文, 洪敏雄, Preparation of Chitosan-Poly(acrylic acid) nanofiber＂中國材料科學學會2004年會11月, 2004, 新竹
8. Chen, C. Y., Wang, J. W. and Hon, M. H., Preparation of Chitosan-Poly(acrylic acid) Nanofiber and Nanofibrous Structure via elf-Assembling＂2005 MRS Spring Meeting Sanfrancisco (America) March 28th- April 1th, 2005.
9. Chiang, K. P., Yang, H. C., Wang, J. W. and Hon, M. H., Preparation and Characterization of Chitosan/Chondroitin Sulfate Nanoparticles as Drug Carrier, 中國化學會94年度化學年會暨學術研討會, 11月, 高雄
10. 姜美琪, 沈佑豪, 張益豪, 王建文, 郭益銘 "以靜電導引自我組裝法製作高分子量幾丁聚醣／聚丙烯酸奈米吸附劑之研究" 中華民國環境工程學會 2006年廢水處理技術研討會, 11月,台中
11. 沈佑豪, 姜美琪, 張益豪, 王建文, 郭益銘 "幾丁聚醣與聚丙烯酸奈米小球在重金屬Pb、Ni吸附行為之研究" 中華民國環境工程學會 2006年廢水處理技術研討會, 11月,台中
12. 黃菀婷, 胡貞伊, 郭益銘, 王建文, 張卿因, 林彥甫''熱熔融熔渣特性對金屬溶出之影響''中華民國環境工程學會 2006年廢棄物處理技術研討會, 11月,台中
13. 胡貞伊, 黃菀婷, 郭益銘, 王建文, 林彥甫, 張卿因"不同冷卻速率對熔渣中重金屬溶出分佈相之影響"中華民國環境工程學會 2006年廢棄物處理技術研討會, 11月,台中
14. 張卿因, 林彥甫, 郭益銘, 陳偉昇, 王建文”以電漿熱熔融飛灰之研究”中華民國環境工程學會 2007年廢棄物處理技術研討會, 11月, 高雄
15. 林其巖, 黃國林, 郭益銘, 王建文, 張卿因, 林彥甫”玻璃相與不同冷卻速率之熔渣及鹽基度之探討”中華民國環境工程學會 2007年廢棄物處理技術研討會, 11月, 高雄
16. 王建文, ”Production and potential of chitosan-poly (acrylic acid) nanofibers as a gene delivery scaffold”中國材料科學學會2008年會, 11月, 台北
17. 郭益銘*、楊朝欽、王建文、王志達“氧化鋁與冷卻方式對於熱熔融熔渣結構與包匣機制之影響”第十二屆海峽兩岸環境保護學術研討會，高雄，10/23，2008。
18. 王建文,* 郭益銘, “奈米氧氫氧化鈷-氧化鋅複合物之製備與微結構分析＂中國材料科學學會2009年會, 11月, 花蓮
19. 王建文,* 郭益銘, “Preparation and characterization of chitosan coated hydroxyapatite nanoparticle as a promising non-viral vector for gene delivery” 中國材料科學學會2010年會, 11月, 高雄
20.J.W. Wang,* Y.M. Kuo “Nano-crystalline Zn-doped CoOOH film gas sensor for carbon monoxide” IUMRS-ICA 2011, September, Taipei.
21. J.W. Wang,* Y.M. Kuo, “Nanostructured cobalt oxyhydroxide film for carbon monoxide detection at low temperatures” 2011 International Conference on Aerosol Science and Technology, Tainan, Taiwan, Oct., 12-14, 2011.
22. 黃仕杰、郭益銘*、曾思萍、周宜成、王建文“幾丁聚醣合成誘導磁性材料吸附廢水中鎳銅離子特性”中華民國環境工程學會2011 第二十三屆廢水處理技術研討會，台南，11/4-11/5, 2011。
23 Jian-Wen Wang* and Yi-Ming Kuo “Hierarchically Porous Cobalt Oxyhydroxide with High Selectivity to Carbon Monoxide Derived from Morpho Butterfly Wings” 2012材料年會, 雲林,11/23~11/24, 2012.
24. P.X.Yang, *J.W.Wang, and Y.M.Kuo (2014, Jun). Preparation of α-Fe2O3-Zinic oxide inverse opal film and its application in low ammonia detection. 國際電子 材料年會（IUMRS-ICEM2014）暨103年中國材料科學學會年會, 台北南港展覽館. 本人為通訊作者.
25. 王建文, 楊佩璇, 郭益銘（2013年10月）。以分子拓印聚合物製備具反蛋白石結構的高感度感測器。2013中國材料科學學會年會，中央大學, 桃園。
26. 曹家麒, 賴淳仁, 吳重霖, 黃菀婷, 王建文, 郭益銘 （2014年11月）。以淘洗程序處理焚化飛灰之研究。廢棄物處理技術研討會，台中。
27. 曹家麒, 賴淳仁, 蔡加正, 王志達, 王建文, 郭益銘 （2014年11月）。以創新概念結合淘洗/熱處理安定高含氯有害焚化飛灰之研究。廢棄物處理技術研討會，台中。
28. 楊佩璇;王建文*;曹家麒;陳怡如;郭益銘 （2015年01月）。喹諾酮類雙模板分子拓印聚合物吸附行為之研究 。2015中華民國高分子學會年會，台北。本人為通訊作者。
29. 王建文;楊佩璇;郭益銘（2015年05月）。雙模板分子拓印聚合物吸附動力學之研究。2015中華環境安全衛生暨消防工程研討會，高雄。本人為第一作者、通訊作者。
30. 楊佩璇;王建文;郭益銘（2015年11月）。分子拓印介孔反蛋白石晶體的感測性質與分子辨識分析。2015年材料年會，高雄。科技部：101-2221-E-273-003-MY2。本人為通訊作者。
31. *王建文; 陳丕恩; 陳鈺靖; 郭益銘（2016年11月）。羧酸型態對形成幾丁聚醣/聚丙烯酸奈米小球之影響。105年中國材料科學學會年會，新竹。本人為第一作者、通訊作者
32. J.W.Wang, Y.C.Wang, C.X.Wei,Y.M.Kuo (2017, Nov). Preparation of Monodisperse Hollow Molecularly Imprinted Polymers for Detection of Organotin. 18th International Union Materials Research Societies, International Conference in 2017, 台北. 本人為第一作者、通訊作者.
33. *王建文, 王映慈, 魏慈心, 郭益銘（2018年11月）。分子拓印石墨烯量子點之製備及其應用於雙酚類化合物偵測之研究。中國材料科學學會107年會暨50週年慶，台中。本人為第一作者、通訊作者。
34. *王建文、吳嘉華、郭益銘（2019年11月）。雙酚類分子拓印石墨烯量子點中空介孔微球吸附行為之研究。108年中國材料科學學會年會，台南。本人為第一作者、通訊作者。
|
